อุปกรณ์เครื่องพิมพ์สกรีนที่ใช้ในความรู้การปรับใช้การเก็บรักษาหมึกในฤดูหนาว

อุปกรณ์เครื่องพิมพ์สกรีนที่ใช้ในความรู้การปรับใช้การเก็บรักษาหมึกในฤดูหนาว

Automatic screen printing machine used ink is too thick, viscosity is also large, but it is best not to adjust its viscosity with thinner or ink blending oil. Because when the user needs to deploy ink regional reports, ink manufacturers produce the original ink can accommodate the total amount of various additives is a limit, beyond the limit amount, even if it can be used, but also weakened the basic performance of the ink, affecting the quality of printing. In addition to over-packaging, the viscosity and consistency of the ink has a relationship, here refers to its nature rather than its phenomenon. And practice is often the case, the ink consistency, but the viscosity is small, its flow is still large. So that unemployment, the consistency of the ink is not necessarily large viscosity, viscosity of the ink is not necessarily large consistency. Ink thickening phenomenon caused by temperature, you can use the following solutions:

(1) the original ink on the radiator or next to the heater, so that it slowly warms up and gradually return to its original state.

(2) when in a hurry, you can use boiling water for external heating, the specific method is to pour boiling water into the basin when the Nali, and then the original barrel (box) ink in the water, but to prevent water vapor immersion, to be the temperature of the water down to 27 ℃ or so removed, open the lid and stir evenly can be used. The temperature of the printing workshop to maintain at about 27 ℃ is appropriate.

Ink at normal temperature also has a thick phenomenon, because the consistency of the ink to a certain extent reflects the rheological properties of the ink. If it is not due to external factors caused by the thickening phenomenon,it can be summarized as the following two reasons: one is caused by the strong thixotropy in the intrinsic structure of the original ink, but after stirring to restore the original state, it can still be used; the second is the expiration date of the ink or the deterioration of the ink due to improper storage, which can not be used. Put the original ink on the heater or next to the heater, so that it slowly warms up and gradually returns to its original state. Emergency use of boiling water can be used for external heating, the specific method is to pour boiling water into the basin when the Nali, and then the original barrel (box) ink in the water, but to prevent water vapor immersion, to be removed when the temperature of the water down to 27 ℃ or so, open the lid and stir evenly can be used. The temperature of the printing workshop should be kept at about 27℃. The above is the screen printing machine equipment used in the winter ink preservation and deployment of common sense!